Constant Interpreter

Introduction

The constexpr interpreter aims to replace the existing tree evaluator in clang, improving performance on constructs which are executed inefficiently by the evaluator. The interpreter is activated using the following flags:

  • -fexperimental-new-constant-interpreter enables the interpreter, emitting an error if an unsupported feature is encountered

Bytecode Compilation

Bytecode compilation is handled in ByteCodeStmtGen.h for statements and ByteCodeExprGen.h for expressions. The compiler has two different backends: one to generate bytecode for functions (ByteCodeEmitter) and one to directly evaluate expressions as they are compiled, without generating bytecode (EvalEmitter). All functions are compiled to bytecode, while toplevel expressions used in constant contexts are directly evaluated since the bytecode would never be reused. This mechanism aims to pave the way towards replacing the evaluator, improving its performance on functions and loops, while being just as fast on single-use toplevel expressions.

The interpreter relies on stack-based, strongly-typed opcodes. The glue logic between the code generator, along with the enumeration and description of opcodes, can be found in Opcodes.td. The opcodes are implemented as generic template methods in Interp.h and instantiated with the relevant primitive types by the interpreter loop or by the evaluating emitter.

Primitive Types

  • PT_{U|S}int{8|16|32|64}

    Signed or unsigned integers of a specific bit width, implemented using the `Integral` type.

  • PT_{U|S}intFP

    Signed or unsigned integers of an arbitrary, but fixed width used to implement integral types which are required by the target, but are not supported by the host. Under the hood, they rely on APValue. The Integral specialisation for these types is required by opcodes to share an implementation with fixed integrals.

  • PT_Bool

    Representation for boolean types, essentially a 1-bit unsigned Integral.

  • PT_RealFP

    Arbitrary, but fixed precision floating point numbers. Could be specialised in the future similarly to integers in order to improve floating point performance.

  • PT_Ptr

    Pointer type, defined in "Pointer.h". A pointer can be either null, reference interpreter-allocated memory (BlockPointer) or point to an address which can be derived, but not accessed (ExternPointer).

  • PT_FnPtr

    Function pointer type, can also be a null function pointer. Defined in "FnPointer.h".

  • PT_MemPtr

    Member pointer type, can also be a null member pointer. Defined in "MemberPointer.h"

  • PT_VoidPtr

    Void pointer type, can be used for rount-trip casts. Represented as the union of all pointers which can be cast to void. Defined in "VoidPointer.h".

  • PT_ObjCBlockPtr

    Pointer type for ObjC blocks. Defined in "ObjCBlockPointer.h".

Composite types

The interpreter distinguishes two kinds of composite types: arrays and records (structs and classes). Unions are represented as records, except at most a single field can be marked as active. The contents of inactive fields are kept until they are reactivated and overwritten. Complex numbers (_Complex) and vectors (__attribute((vector_size(16)))) are treated as arrays.

Bytecode Execution

Bytecode is executed using a stack-based interpreter. The execution context consists of an InterpStack, along with a chain of InterpFrame objects storing the call frames. Frames are built by call instructions and destroyed by return instructions. They perform one allocation to reserve space for all locals in a single block. These objects store all the required information to emit stack traces whenever evaluation fails.

Memory Organisation

Memory management in the interpreter relies on 3 data structures: Block objects which store the data and associated inline metadata, Pointer objects which refer to or into blocks, and Descriptor structures which describe blocks and subobjects nested inside blocks.

Blocks

Blocks contain data interleaved with metadata. They are allocated either statically in the code generator (globals, static members, dummy parameter values etc.) or dynamically in the interpreter, when creating the frame containing the local variables of a function. Blocks are associated with a descriptor that characterises the entire allocation, along with a few additional attributes:

  • IsStatic indicates whether the block has static duration in the interpreter, i.e. it is not a local in a frame.

  • DeclID identifies each global declaration (it is set to an invalid and irrelevant value for locals) in order to prevent illegal writes and reads involving globals and temporaries with static storage duration.

Static blocks are never deallocated, but local ones might be deallocated even when there are live pointers to them. Pointers are only valid as long as the blocks they point to are valid, so a block with pointers to it whose lifetime ends is kept alive until all pointers to it go out of scope. Since the frame is destroyed on function exit, such blocks are turned into a DeadBlock and copied to storage managed by the interpreter itself, not the frame. Reads and writes to these blocks are illegal and cause an appropriate diagnostic to be emitted. When the last pointer goes out of scope, dead blocks are also deallocated.

The lifetime of blocks is managed through 3 methods stored in the descriptor of the block:

  • CtorFn: initializes the metadata which is store in the block, alongside actual data. Invokes the default constructors of objects which are not trivial (Pointer, RealFP, etc.)

  • DtorFn: invokes the destructors of non-trivial objects.

  • MoveFn: moves a block to dead storage.

Non-static blocks track all the pointers into them through an intrusive doubly-linked list, required to adjust and invalidate all pointers when transforming a block into a dead block. If the lifetime of an object ends, all pointers to it are invalidated, emitting the appropriate diagnostics when dereferenced.

The interpreter distinguishes 3 different kinds of blocks:

  • Primitives

    A block containing a single primitive with no additional metadata.

  • Arrays of primitives

    An array of primitives contains a pointer to an InitMap storage as its first field: the initialisation map is a bit map indicating all elements of the array which were initialised. If the pointer is null, no elements were initialised, while a value of (InitMap*)-1 indicates that the object was fully initialised. When all fields are initialised, the map is deallocated and replaced with that token.

    Array elements are stored sequentially, without padding, after the pointer to the map.

  • Arrays of composites and records

    Each element in an array of composites is preceded by an InlineDescriptor which stores the attributes specific to the field and not the whole allocation site. Descriptors and elements are stored sequentially in the block. Records are laid out identically to arrays of composites: each field and base class is preceded by an inline descriptor. The InlineDescriptor has the following fields:

    • Offset: byte offset into the array or record, used to step back to the parent array or record.

    • IsConst: flag indicating if the field is const-qualified.

    • IsInitialized: flag indicating whether the field or element was initialized. For non-primitive fields, this is only relevant to determine the dynamic type of objects during construction.

    • IsBase: flag indicating whether the record is a base class. In that case, the offset can be used to identify the derived class.

    • IsActive: indicates if the field is the active field of a union.

    • IsMutable: indicates if the field is marked as mutable.

Inline descriptors are filled in by the CtorFn of blocks, which leaves storage in an uninitialised, but valid state.

Descriptors

Descriptors are generated at bytecode compilation time and contain information required to determine if a particular memory access is allowed in constexpr. They also carry all the information required to emit a diagnostic involving a memory access, such as the declaration which originates the block. Currently there is a single kind of descriptor encoding information for all block types.

Pointers

Pointers, implemented in Pointer.h are represented as a tagged union. Some of these may not yet be available in upstream clang.

  • BlockPointer: used to reference memory allocated and managed by the interpreter, being the only pointer kind which allows dereferencing in the interpreter

  • ExternPointer: points to memory which can be addressed, but not read by the interpreter. It is equivalent to APValue, tracking a declaration and a path of fields and indices into that allocation.

  • TargetPointer: represents a target address derived from a base address through pointer arithmetic, such as ((int *)0x100)[20]. Null pointers are target pointers with a zero offset.

  • TypeInfoPointer: tracks information for the opaque type returned by typeid

  • InvalidPointer: is dummy pointer created by an invalid operation which allows the interpreter to continue execution. Does not allow pointer arithmetic or dereferencing.

Besides the previously mentioned union, a number of other pointer-like types have their own type:

  • ObjCBlockPointer tracks Objective-C blocks

  • FnPointer tracks functions and lazily caches their compiled version

  • MemberPointer tracks C++ object members

Void pointers, which can be built by casting any of the aforementioned pointers, are implemented as a union of all pointer types. The BitCast opcode is responsible for performing all legal conversions between these types and primitive integers.

BlockPointer

Block pointers track a Pointee, the block to which they point, along with a Base and an Offset. The base identifies the innermost field, while the offset points to an array element relative to the base (including one-past-end pointers). The offset identifies the array element or field which is referenced, while the base points to the outer object or array which contains the field. These two fields allow all pointers to be uniquely identified, disambiguated and characterised.

As an example, consider the following structure:

struct A {
    struct B {
        int x;
        int y;
    } b;
    struct C {
        int a;
        int b;
    } c[2];
    int z;
};
constexpr A a;

On the target, &a and &a.b.x are equal. So are &a.c[0] and &a.c[0].a. In the interpreter, all these pointers must be distinguished since the are all allowed to address distinct range of memory.

In the interpreter, the object would require 240 bytes of storage and would have its field interleaved with metadata. The pointers which can be derived to the object are illustrated in the following diagram:

    0   16  32  40  56  64  80  96  112 120 136 144 160 176 184 200 208 224 240
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
+ B | D | D | x | D | y | D | D | D | a | D | b | D | D | a | D | b | D | z |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
    ^   ^   ^       ^       ^   ^   ^       ^       ^   ^       ^       ^
    |   |   |       |       |   |   |   &a.c[0].b   |   |   &a.c[1].b   |
    a   |&a.b.x   &a.y    &a.c  |&a.c[0].a          |&a.c[1].a          |
      &a.b                   &a.c[0]            &a.c[1]               &a.z

The Base offset of all pointers points to the start of a field or an array and is preceded by an inline descriptor (unless Base is zero, pointing to the root). All the relevant attributes can be read from either the inline descriptor or the descriptor of the block.

Array elements are identified by the Offset field of pointers, pointing to past the inline descriptors for composites and before the actual data in the case of primitive arrays. The Offset points to the offset where primitives can be read from. As an example, a.c + 1 would have the same base as a.c since it is an element of a.c, but its offset would point to &a.c[1]. The array-to-pointer decay operation adjusts a pointer to an array (where the offset is equal to the base) to a pointer to the first element.

ExternPointer

Extern pointers can be derived, pointing into symbols which are not readable from constexpr. An external pointer consists of a base declaration, along with a path designating a subobject, similar to the LValuePath of an APValue. Extern pointers can be converted to block pointers if the underlying variable is defined after the pointer is created, as is the case in the following example:

extern const int a;
constexpr const int *p = &a;
const int a = 5;
static_assert(*p == 5, "x");

TargetPointer

While null pointer arithmetic or integer-to-pointer conversion is banned in constexpr, some expressions on target offsets must be folded, replicating the behaviour of the offsetof builtin. Target pointers are characterised by 3 offsets: a field offset, an array offset and a base offset, along with a descriptor specifying the type the pointer is supposed to refer to. Array indexing adjusts the array offset, while the field offset is adjusted when a pointer to a member is created. Casting an integer to a pointer sets the value of the base offset. As a special case, null pointers are target pointers with all offsets set to 0.

TypeInfoPointer

TypeInfoPointer tracks two types: the type assigned to std::type_info and the type which was passed to typeinfo.

InvalidPointer

Such pointers are built by operations which cannot generate valid pointers, allowing the interpreter to continue execution after emitting a warning. Inspecting such a pointer stops execution.

TODO

Missing Language Features

  • Changing the active field of unions

  • volatile

  • __builtin_constant_p

  • dynamic_cast

  • new and delete

  • Fixed Point numbers and arithmetic on Complex numbers

  • Several builtin methods, including string operations and __builtin_bit_cast

  • Continue-after-failure: a form of exception handling at the bytecode level should be implemented to allow execution to resume. As an example, argument evaluation should resume after the computation of an argument fails.

  • Pointer-to-Integer conversions

  • Lazy descriptors: the interpreter creates a Record and Descriptor when it encounters a type: ones which are not yet defined should be lazily created when required

Known Bugs

  • If execution fails, memory storing APInts and APFloats is leaked when the stack is cleared